Here are some simple steps to help you solve the krnl386 error problem.
Quick and Easy PC Repair
If the hard drive is not recognized, it can be due to various reasons. In many cases, the application is enough for several “number one solutions”, which are always and everywhere used for PC problems. Likewise, replacement—defective and dusty cleaning—of cables promises a quick fix and will display multiple storage media. If the error image cannot be resolved with this repair attempt, you can check other options.
Solution Number One: Restart
For all problems caused by the computer, regardless of their type, there is a solution that should always be performed first. Only if this “solution number one” – rebooting (including the computer. Restarting the storage medium) – does not work, other solutions can be used to look for legitimate sources of the error.
Attention: If you immediately notice that the storage medium is making loud noises (clicking the hard drive), please reset it, but unplug the hard drive from the power source. RestoreData storage from hard drives or solid state drives should only be performed by experts.
If the hard drive is still not recognized after a reboot, it’s best to test it. It’s a different Windows UI computer, take a look at disk management. If the hard drive cannot be found in Disk Management, the error is most likely caused by a hardware and BIOS issue. Although the hard drive can be found, it is not accessible, in many cases this is a logical problem with the partition. On a
MAC, see Disk Utility or Disk Utility for more information about disk initialization.
Free Tip Right Now: Request Data Recovery
Check Connections And Cables
In the event of a hardware problem, the first thing to check is the connections and cables. If the external hard drive doesn’t show up at all, it might be due to a bad USB connection. Cleaning the USB connector or replacing the USB cable often helps. Don’t forget that the hard drive is defined in the “Hard Drive Management”.Skami” is a guarantee that the problem is not always in the USB cable.
You have verified that your external hard drive is NOT showing up in Disk Management on your GUI PC. Then not only a faulty USB cable can interfere with playback from the hard drive.
A dusty SATA connector on an internal hard drive can also resolve the cause of the hard drive not being recognized. If unplugging the cable, cleaning the plug, and plugging it back in doesn’t solve the problem, it might not be a dusty SATA connector cable, but a bad cable. , a solution in itself.
Remove the cables to the USB ports briefly. Here, too, the problem may lie in the details of the outlet. If you are trying to use USB 3.0 – no longer working – currently the most common internal hard drive option – a blue connection and the appropriate driver for that storage medium should be available. If the driver is missing, you can download it from the motherboard manufacturer’s website.
Even With SSD Hard Drives: Check The SATA Port
In case of undetected Solid State Drive (SSD) One of the first attempts to solve the problem should be the SATA port. One of these communication interfaces may be defective. In such cases, simply using the SATA connector on the motherboard is sufficient. It is also important to always remember the latest motherboard BIOS update.
Hard drive not recognized? Request a no-obligation data recovery
No Drive Letter Assigned
Normally, Windows displays the hard drive as a directory on the D: drive. If the external drive is now close to discoverable by Disk Management but still not recognized, it may be because the hard drive has not been assigned a drive letter. In this case, try adding a drive letter. This is done in the so-called “Disk Management” of the Windows Control Panel. In many cases, you can solve the problem of unrecognizable hard drive in this way.
You can access Disk Management in Windows via
Right click the Windows logo on the left side of the taskbar and go directly to Disk Managementvia the context menu.
Disk Without File System
Another reason why the hard drive is not recognized is the lack of a file system. In the case of Windows user interface, this must comply with the FAT32 (File Allocation Table) or NTFS (New Technology File System) file system. In such cases, initialize the hard drive. The disk can then be partitioned into different zones. The storage medium is then formatted with the appropriate file system in the storage medium management. Usually a quick format is sufficient.
Attention: If the hard disk is suddenly not recognized, but contains important data, do not initialize or format the hard disk under any circumstances! The partition table may have been deleted and confirmed.
Not Initialized > Create Section
On newer hard drives, exhausted logical partitions may not be available automatically. After recreating the missing logical areas through Disk Management, there will be no more problems with recognizing the hard drive.Enjoy a faster